Back to HomePage

List of Submitted Papers

Dark coloured contributions have been edited by the administrator of data base to conform with formal requirements. Only these contributions will be considered for presentation.
If you might find any error in inscription of your paper (which has already been denoted in the table as edited), please download and upload your summary again. This will notify automatically the administrator of data base. If your paper is not denoted as edited in the table, the reason may be:
  • too short time since summary has been received, or
  • summary is missing, or
  • summary is incomplete, or
  • summary does not conform with requirements, or
  • there is some problem with the editing - in this case please contact the Organising Committee (org@chisa.cz) to resolve the problem.


Notes and explanations
  • Author team = list of authors with speaker denoted by asterisk
  • Topic = Number of related topic
  • Accepted as = KL - keynote lecture, L - lecture, P - poster
  • Title = title of paper
  • Country = country of the corresponding author. For the list of country codes click here

Individual searches in the table can be made by pressing CTRL and F.

Serial Num. Topic Accepted As Author Team Title Country
2 13 L *Behzadi, Noei, Azimi, Mirzaei, Anaraki Experimental optimization of the disinfection performance of sodium hypochlorite and hypochlorous acid in pilot and industrial cooling towers IR
3 14 P *Figueiredo, Santos Preparation of the Technology Roadmap for the reuse of coffee grounds with emphasis on the biofuels, pharmaceuticals, and cosmetics industries BR
4 77 P *Hassan, Al-Jashamy Thermodynamic and kinetic investigation of cobalt (II) ions removal using environmentally synthesized NiO/γ-Al2O3 nanoparticles IQ
5 25 L *Azadi Tabar, Denayer Multicolumn pressure swing adsorption for biogas upgrading to biomethane BE
6 43 P *Jalloul, Hijazi, Boyadjian, Awala, Albadarin, Ahmad Titania/Fe-ion exchanged zeolite composite for tetracycline photocatalytic degradation under visible light LB
7 33 P *Lan, Xuan Simultaneous determination of the droplet size and interfacial tension by microfluidic method without visualization CN
8 33 P *Li, Cai Measurement of droplet coalescence in a mixing tank CN
9 41 L Nagieva, Ali-zadeh, *Nagiev Gas-phase oxidation of 2-picoline with a “green oxidizer” – N2O AZ
10 33 L Lee, *Wu Wafer removal rate and non-uniformity for chemical mechanical planarization using Ansys Fluent TW
11 11 L Liang, *Wu Development of a new predictive blast furnace model with carbon reduction strategies TW
12 74 P *Bitchikh, Smakghi, Meniai Thermodynamic models assessment for the determination of salicylic acid and paracetamol solubility’s in different solvents DZ
13 25 L *Fauziah, Yeh A biomimetic MOF-on-COF ionic diode membrane as ultrahigh-performance osmotic energy generator TW
14 55 P *Fauziah, Yeh Multilevel Janus sandwich architecture metal-organic framework membrane for accelerated dual-ion-selective transport in organic solutions TW
15 27 L *Moravkova Optimization of cycle chemistry in CCGT with surface-active chemistry without amines for energy-saving technologies and reducing the burden on the environment SK
16 51 P *Kırbıyık Kurukavak, Toprak, Tok, Yurdakul, Ersöz Effect of hetero-atom doping on the properties of carbon quantum dots for the detection of heavy metal ions TR
17 36 P *Najafi Lahiji, Kulak, Vankelecom, Denayer Separation of light olefins and paraffins: appraising the adsorption performance of MOF-808 adsorbents BE
18 64 P Lee, *Hyun Biophotovoltaic hydrogel embedding microalgae for long-term generation of electric power KR
19 11 KL *Oluleye Evaluating interventions for accelerating low to zero emission technologies from demonstration to market saturation UK
20 62 L *Arteaga Pérez, Larrere, Chávez Delgado, Concha, Rueda Ordoñez, Segura, Norambuena Contreras, Casas Ledón Pyrolytic oils from mining waste tyres as encapsulated rejuvenators for asphalt self-healing: Process simulation and life cycle assessment CL
21 64 L *Singh, Chetty, Rathilal Establishment of high lipid and hydrocarbon microalgae strains suitable for biodiesel production: culturing and screening of microalgae ZA
22 13 L *Palma, Sepúlveda, Carvajal, Kalm, Arias Removal of pharmaceutical trace organic components with granulated activated carbon, in solutions containing up to four components CL
23 82 KL *Harmsen, Bos An alternative approach to teaching chemical reaction engineering NL
24 35 L *Wang, Tao, Wang, Liu Intensification of non-Newtonian fluids chaotic mixing by modulating structural interfaces in confined flow fields CN
25 15 KL *Leonzio, Triantafyllou, Shah Optimization and analysis of an integrated direct air capture and Fischer-Tropsch process for diesel production IT
27 54 L Mondragon, Ramos, Sta. Agueda, De Los Reyes, Agcaoili, Ylagan, Abedejos, *Dugos Development and characterization of hydrogel from decellularized whole porcine kidney PH
28 75 KL *Abro Hydrodynamic parameters and bubble characteristics in CO2 absorption column PK
29 11 L Zamani, *Vafajoo Exploring the feasibility of solar power systems for low-consumption upstream oil and gas facilities: A case study of Line Breaker Valves (LBV) stations IR
30 36 L *Polat Redox-mediated electrochemical separation of boron ions in aqueous media under continuous flow conditions TR
31 67 L Santacruz, *Davila, Vega Assessment of antioxidant activity and phenol content in oil obtained from defective green coffee beans (Coffea arabica) using supercritical CO2 CO
32 23 L *Marques, Lopes, Mendes High-performance proton exchange membrane water electrolyzer using low-loading iridium oxide supported on tungsten trioxide as anode catalyst PT
33 44 L *Azenha, Pereira, Mendes Synthesis, structure, and electronic properties of CuZn catalysts for enhanced electrochemical reduction of CO2 PT
34 27 P *Behzadi, Noei, Azimi, Anaraki-Ardakani Experimental evaluation of free chlorine adsorption from circulating water in cooling towers by activated carbon in a fixed bed column IR
35 15 L Boon, *de Groot, Groot Obbink, Loman, van der Ham, Lange, van den Berg, Franke Process design for poly lactic acid chemical recycling NL
36 75 L *Ruiz Vasquez, Bertrand, Ramiere, Lebaz, Mangin Simulation of actinides and lanthanides oxalic precipitation in a vortex reactor: multi-compartmental approach FR
37 75 L *Lazman Simultaneous Flash: the solution for effective Equation-Oriented simulation CA
38 13 L *Saththasivam, Almarri Comparative performance analysis of air gap and direct contact membrane distillation for ultra-pure water recovery from boiler blowdown QA
40 44 L *Moghimpour Bijani, Sahebdelfar, Mahboubi Effect of calcination temperature on catalytic performance of γ-Al2O3 in methanol dehydration to dimethyl ether IR
41 44 L Rodríguez, Guerra, Vizuete, Debut, Almeida, Mora, *Ponce Engineered biochar as a catalyst for the production of diesel-like fuels from waste motor oil EC
42 78 P *Contreras-Valenzuela, Roman-Olais Ergonomic and socially responsible procedure for redesigning industrial processes: A case study of the cartridge washing process MX
44 69 P *García-Martínez, Pérez-Román, Hernández-Botello, Rodríguez Nava, Shafeeyan Carbon dioxide adsorption: isotherm and temperature effect on breakthrough curve MX
45 35 L *Touma, Lebaz, Sheibat-Othman Centrifugal creaming study of concentrated oil-in-water emulsions FR
46 35 L *Touma, Lebaz, Philippe, Sheibat-Othman Continuous turbulent liquid-liquid emulsification using open-cell solid foams FR
47 64 L Gholami, Middelkamp, De Groot, Tijburg, Kersten, Franke, *Schuur Process comparisons for lactic acid: choline chloride deep eutectic solvent regeneration after pulping spruce chips NL
48 27 L *Xu Recovering solvent from nonaqueous bitumen extraction waste by liquid/supercritical carbon dioxide CA
49 66 P Ishfaq, *Ahmad Synthesis of graphene based ferrite composite for the removal of dyes from synthetic wastewater PK
50 33 P *Liu, Hu, Yuan, Wang, Luo Modeling of microfluidic droplets from capillary embedded microchannel generators with tree-based machine learning methods CN
51 26 L *Merino-Garcia, Abarca, Crespo, Díaz-Sainz, Albo Photoelectrochemical CO2 conversion to formate coupled with glycerol oxidation using optimized CaTiO3/WO3/BiVO4 photoanodes ES
52 68 KL *Topka, Jirátová, Čada, Naiko, Ostapenko, Balabánová, Koštejn, Maixner, Hubička, Kovanda Transition metal oxide catalysts supported on stainless steel meshes prepared by plasma jet sputtering: application to VOC oxidation CZ
53 36 P *Stoll, Antonyuk Influence of the mask shape and the fit factor for FFP2 and FFP3 masks DE
54 66 L *Panepinto, Ravina, Zanetti Municipal solid waste thermal treatment – An overview on the environmental aspects IT
55 66 L *Ravina, Marotta, Piccirillo, Cerutti, Zanetti, Mori de Oliveira, Ruffino, Panepinto, Marini, Zanetti Experimental tests for acid flue gas emissions treatment in industrial applications IT
56 74 L *Sidarava, Rehfeldt, Klein Thermodynamic modeling of mobile cryogenic tanks with a liquid-cooled thermal shield DE
57 51 L *Portugal Ochoa, Miranda Zanardi Effect of the concentration of a foaming agent and ferric cross-linker on the structure of a pectin aerogel designed as a food matrix PE
58 45 L *Hachhach, Russo, Simakova, Eränen, Murzin, Salmi Liquid flow impact on arabinose oxidation: experimental and numerical study FI
59 51 L *Sun Development of nanocomposites with boron nitride nanomaterials for directional or isotropic thermal transport and related applications US
60 75 L *Lang, Haseneder, Stenzel, Herdegen Optimization of the industrial wastewater treatment in a superstructure process synthesis exemplified for coke plants DE
61 44 L *Orrego A., Galvis-Nieto, Salgado Functionalized biopolymer support for high-potential industrial enzyme immobilization CO
62 33 L *Singh, Karp, Belt, Liné Simulation of the motion of elongated air bubble in stagnant water flowing in 1° inclined pipe FR
63 75 L *Luo, Lan, Shi, Gao, Zhang A deep learning and CFD based predict model for MIP riser flow characteristics CN
64 15 KL *Arora, Toor, Wanchoo Eco-friendly fiberboard panels from fermented organic manure IN
65 31 L Metawea, Mukherjee, Walker, *Albadarin Study of process parameters that enable direct spray drying synthesis of UiO-66-NH2 LB
66 43 L *Hamdan, Zeaiter Ultra-stable Ni-Zn/USY for low temperature methane pyrolysis LB
67 41 L *Nakagawa, Matsumoto, Taichi Hydrogen production through the catalytic decomposition of CH4 over Fe/Al2O3 JP
69 32 L *Hosseini, Di Felice CFD simulation of high gas flow rate in a large-scale rotating packed bed IT
70 66 P Lee, Cheng, *Fan Structural influence of micropollutants on the chemically oxidative degradation by hydroxyl radicals TW
71 26 L *Yang, Sun, Lin Design strategy of metal foam flow field in proton exchange membrane fuel cell CN
72 72 L *Lin, Zhang, Yang, Qiu, Norinaga Enhancement of coke resistance in dry reforming of methane through open-cell foam catalyst with hierarchical pore structure CN
73 75 L *Valenzuela Implementation of the unit cell of the metal-organic framework UIO-66 in NAMD for molecular dynamic simulation CL
74 23 L *Wang, Yang, Qiu Investigation on catalytic distillation dehydrogenation of perhydro-benzyltoluene: Reaction kinetics, modeling and process analysis CN
75 74 P Bazile, *Daridon Measurement of viscosity in diesel-biodiesel blends under high pressure conditions FR
76 71 L *Zhang, Lin, Zhang, Li, Chen, Norinaga Numerical simulation on the regulation of temperature distribution in fixed bed reactor for CO2 methanation CN
77 25 L *Barros, Raston, Heydari Scaling up green production of sustainable biofuels AU
78 35 L Al Yahmadi, *Vakili-Nezhaad, Al Maamari Surface tension of binary crude oil blends: Measurement and correlation OM
79 73 L *Riaz, Uusi-Kyyny, Pokki, Alopaeus Upgrading of chemically recycled plastic waste by distillation FI
80 27 L *Trescher, Mogalle, Ränger, Seidel, Ludl, Bortz, Grützner Pareto-optimal dividing wall columns under thermodynamic and technical uncertainties DE
81 13 L *Paparo, Trifuoggi, Uggeri, Nicolais, Di Serio, Russo Process intensification for removal of new pharmaceutical compounds from water IT
82 63 P Kacar, Vardar, *Demirel Determination of microplastic and microbial composition in wastewater treatment plants (WWTPs) employing a rotating biological contactor (RBC) unit TR
83 73 L *Lukas Development of a liquid splitter for an additively manufactured, laboratory-scale dividing wall column (DWC) DE
84 41 L *Küchen, Olszok, Weber, Turek In situ axially-resolved measurement of CO intermediate product formation in CO2 methanation DE
85 13 L *Mutsvene, Chetty, Kumari, Bux Valorisation of sewage sludge for sustainable bioenergy recovery through hydrothermal treatment ZA
86 25 L *Yeh Towards ultrahigh osmotic energy harvesting by covalent-organic framework based ionic diode membranes TW
87 58 L *Bufalini, Campardelli Innovation in probiotic encapsulation strategies using emulsion based techniques IT
88 62 L *Keller, Hlawitschka Solvent extraction of sulfuric acid from lithium-ion battery leachate AT
89 76 KL *Russo, Taddeo, Tesser, Salmi, Di Serio Process intensification applied to overcome thermodynamic equilibrium conversions for reversible reactions: levulinic acid esterification IT
90 15 L *Fernandes, Holz, Loureiro, Duarte, Fagg, Mendes Electrochemical interpretation of a Solid Oxide Fuel Cell stack for simultaneous nitrous oxide valorization using diluted ammonia fuel PT
91 33 L *Silva, Campos, Araújo Enhanced slug flow dynamics: inclined to curved tube hydrodynamics PT
92 58 L *Keller, Chmelař, Mrázek, Zubov Objective morphological characterization of porous hyaluronan films CZ
93 27 L Saquib, Julian, Suhardi, *Setiadi Breathing new life into textile dyeing wastewater: harnessing intermittent aeration for enhanced treatment in a cutting-edge downflow hanging sponge column with hollow fibre submerged anaerobic membrane bioreactor ID
94 51 L *Han, Seo, Burla, Lee Development of an innovative HFC-125a hydrate extinguisher on Class B fires KR
95 13 L *Kato, Sakai, Kansha Effect of the droplet size on the decomposition of organic compounds using mist and photocatalyst JP
96 64 L Fogarin, Neto, Sabino, Bérgamo, Moreno, Silva, *Dussán Investigating the influence of solvents on the efficacy of phenolic compound extraction from spent coffee grounds BR
97 36 L *Appelhaus, Jasch, Scholl Modeling of fluid dynamics in wiped film evaporators during evaporation DE
98 51 P Choi, *Hyun Reversible transition of transparency with a cellulose nanofiber/silicon nanoparticle composite film KR
99 71 L *Pawanipagar, Ghasemzadeh, Spallina, D'Agostino Single step conversion of glycerol to acrylic acid using membrane reactor: optimizing parameters and model validation UK
100 64 L *Mirizadeh, Casazza, Converti Removal of tetracycline and crystal violet by magnetic chitosan-lipid free Chlorella vulgaris biocomposite IT
101 15 L *Moldes, López-Prieto, Vecino, Pérez-Cid, Cruz Assessment of a pilot-scale biosurfactant extract from corn milling industry byproduct for sustainable pesticide formulations ES
102 64 L *Duque, Cañadas, Higueras, Iglesias, Manzanares Solvent-reactive green extrusion for the processing and valorization of vine shoot residue ES
103 58 P *Tanaguzov, Bekenova, Glazhdinova, Begimova Thermosensitive polymers as a component for synthesize of thermoregulated transdermal patch with dandelion extracts (Taraxacum Officinale) KZ
104 74 KL *Lee, Pratama Recycling of resolving agent and solvent by water-based reactions and phase diagrams: chiral resolution study of racemic ibuprofen TW
105 75 L *Malek, Fricke Generate and optimize flowsheets from a paper using Artificial Intelligence (AI) DE
106 55 L *Carichino, Lionetto, Maffezzoli, Esposito Corcione PLA-PET copolymer by transesterification process IT
107 64 L *Cañadas, Duque, Álvarez, Iglesias, Manzanares Advances in fractionation of vine shoot: pretreatment with ionic liquids to foster sugar production and bioproduct recovery ES
108 12 L *Burla, Han, Seo, Lee Carbon dioxide capture and storage via boric acid, an inorganic catalyst for CO2 hydrates KR
109 72 L *Tolepbergen, Mukamedenkyzy, Akberdiev Development of convective flows in initially diffusionally unstable gas mixtures KZ
110 74 L *Xu, Nichita, Moncorgé Hybrid Brent and Newton algorithms in nested two-phase isenthalpic flash calculations for CO2 storage simulations FR
112 72 L Kossov, *Fedorenko, Asembaeva, Seydaz Description of diffusion instability in gas mixtures containing components with real properties at different pressures KZ
113 15 L *Karunanayake, Brütsch, Meunier, Salman Evaluating the sustainability of competing granulation technologies UK
114 36 L *Xu, Xu Molecular simulation study on pore structure design of membrane materials and strengthening mechanism for low-carbon paraffin/olefin separation CN
115 26 L *Capitão, Ivanou, Mendes Rethinking dye-sensitized solar cell design with carbon paper counter electrodes PT
116 14 L *Mohamad, Al-Asady, Meunier, Felder, Salman Improving the shelf life through work hardening in food powder via roller compaction UK
117 31 L *Ma, Washino, Al-Asady, Salman Mechanistic insights into the shape evolution and influencing factors of repose angle heaps of different dairy materials UK
118 74 P *Li, Sanders, Salman Model for single droplet drying of milk and its constituents at critical boiling temperatures UK
119 35 P *Wang, Sanders, Salman Spontaneous particle motion in static bulk water UK
120 78 L Jara Echeverría, *Nieto-Márquez, Rivas Seijas, Sánchez Redondo, Atanes Sánchez, Díaz López Upgrading fly ash from municipal solid waste incineration ES
121 73 P Quinchuela, *Nieto-Márquez, Díaz López Exergy analysis of process configurations for phenols recovery from wastewater ES
122 42 P *Nieto-Márquez, Díaz López, Mehmandoustesfahani Photocatalytic activity of Fe doped TiO2 thin films under visible light ES
123 14 L *Dewulf, Hausmann, Bozon, Niederreiter, Salman Particle phantom packaging: particle microstructure engineering for integrated edible packaging in sustainable consumer foods UK
124 69 L *Freitas, Syron From HRAPs to biofilm systems: evolution and prospects in microalgae-based wastewater treatment technologies IE
125 64 P *Guendouz, Rezzaz-Yazid, Sadaoui Effect of stirring speed on the co-digestion process of date pedicels and cattle manure DZ
126 14 L *Adiletta, Sambucci, Valente, Russo Evaluation of improving shelf-life and quality of fresh tomato by using different chitosan-based edible coatings IT
127 69 L *Gallard, Wantz, Hebrard, Bouchoux, Valentin Phytosterols and lipids for CH4 capture FR
128 62 P Marcos-García, Fernández-González, *Rumayor, Irabien Technical and environmental assessment of neodymium recycling from secondary sources ES
129 12 L *Rumayor, Fernández-González, Laso, Domínguez-Ramos, Irabien The transition to a defossilized e-methanol production: A dynamic-LCA of electrochemical CO2 conversion strategies ES
130 60 P *Pan, Tseng, Lin, He Advances in electrodialysis-based technologies for water-energy-carbon nexus TW
131 74 P *Bispo, Santana, Santos, Marinho, Rodrigues, Santos, Hartmann, Pessoa A critical evaluation of thermodynamics models for hydrogen storage using Aspen plus BR
132 76 L *Malek, Schneider, Paschetag, Jasch, Azizi, Plinge, Marzilger, Göttl, Scholl, Fricke Process design and optimization using Life Cycle Assessment (LCA) DE
133 64 L *Fittkau, Baganz, Hass A new biogas digital twin for agricultural anaerobic digestion processes DE
134 75 L *Bana, Lamadie, Charton, Lucor, Sheibat-Othman A physics-informed machine learning network to solve the population balance equation FR
135 23 L *Colelli, Verdone, Bassano, Vilardi Analysis and modelling of the methanation process biological for power to gas applications IT
136 66 L Caido, Lesidan, Cadondon, Bulan, Roque, Vallar, *Galvez Analysis of air quality trends before, during, and after the COVID-19 lockdowns along Taft Avenue, Manila, Philippines PH
137 56 L *Kiyomoto, Sakai, Kansha Application of magnetic phase transition in energy harvesting temperature sensors JP
138 35 L *Žák, Moucha Axial dispersion in stirred tank reactor CZ
139 82 L Appl, Fittkau, Baganz, *Hass BioRefineryTrainer – A new training simulator for biorefineries DE
140 11 P *Colelli, Verdone, Bassano Carbon dioxide capture and conversion technologies: a review IT
141 31 L *Mastroianni, Di Serio, Salmi, Russo Comprehensive reverse flow reactor model for fluid-solid systems FI
142 73 L *Ashour, Stucke, Lukas, Grützner Contact angles of standard distillation mixtures under saturated atmosphere: conventional vs 3D-printed surfaces DE
144 41 L *Duval, Lalleman, Pino Herrera, Lamadie, Guézennec, Magnaldo, Schaer Development of in situ methods for measuring dissolution kinetics : application to the leaching and bioleaching of cobaltiferous pyrite FR
145 72 L Pour, Krasovitov, *Fominykh, Hashemloo, Kharaghani, Tsotsas, Levy Effect of gas absorption/desorption on drying of acoustically levitated wet porous particle IL
146 76 L *Rodriguez-Castillo, Alonso-Macías, Téllez-Pérez, Cardador-Martínez Effects of instant controlled pressure drop on amaranth phytochemicals and antioxidant capacity MX
147 13 L Zažímal, Plašienka, Atri, Montfort, *Homola Enhancing photocatalytic degradation of pharmaceutical pollutants in wastewater using air plasma-treated g-C3N4: Insights from ab initio simulations CZ
148 60 L *Ino, Sakai, Kansha Evaluation of profit-oriented waste gas utilization system for NOX gas JP
149 76 L *Teresa-Martínez, Cardador-Martínez, Alonzo-Macías, Téllez-Pérez Impact of instant pressure drop technology on cardamom fatty acid profile MX
150 15 P *Segneri, Verdone Integrated strategies for circular economy: a review of innovative approaches for decarbonization of chemical processes IT
151 82 L *Caccavale, Gargalo, Gernaey, Krühne JuST: Julia simulation tutorials for process systems engineering applications DK
152 41 L *Meng, Kebir, Leveneur Kinetic modeling comparison on the epoxidation of cottonseed oil and the corresponding fatty acid methyl ester FR
153 36 L *Giustacori, Brunazzi Mass transfer characterization of a Reverse Jet Scrubber IT
154 64 P *Pérez Román, Rocha Ríos, Altuzar Villatoro, Manzano Zavala, García Martínez Modeling and analysis of biogas production from the organic fraction of municipal solid waste generated in different cities around the world MX
155 64 L *Mishra, Vitelli, Tamer, Tartakovsky, Budman Monitoring the effect of oxidative stress on pertactin productivity in Bordetella Pertussis cultures: A mechanistic approach CA
156 25 L *Alves, Atashi, Pereira, Dias, Prieto, Mendes Nanostructured SiO2-supported Ni-Fe catalysts loaded onto a planar slab reactor for stable catalytic methane splitting PT
157 31 L *Ono, Sasayama, Kosaka, Morimoto, Matsuoka, Kuramoto Numerical investigation of spatiotemporal CO2 capture and hydrogenation behaviors in fixed and moving bed reactors using a dual-function material JP
158 52 L *Cuervo, Otalora, Rojas, Herrera, Serrato Obtaining 3D printing filament based on additive polylactic acid with polyethylene glycol (PEG) and/or lactic acid oligomers (OLA) from whey CO
159 13 L *Seo, Han, Burla, Lee Purification of various wastewater by hydrate-based purification process KR
160 65 KL *Laitinen, Huotari, Jauhiainen Removal of halogens from plastics pyrolysis oil by adsorption FI
161 75 P *Mancera-Apolinar, Mendoza, Andersson, Riascos Simulation of mass transfer and hydrodynamics in a sieve tray distillation column using Computational Fluid Dynamics CO
163 27 L Dubois, Djettene, De Weireld, *Thomas Study of an integrated CO2 capture and conversion unit to methanol: process simulation, evaluation and optimization BE
164 75 L *Fröhlich, Staubach, Illner, Repke Study on CO production by reverse water-gas shift reaction with membrane purification in the scope of load flexible operation DE
165 11 L *Micciancio, Di Palma, Rosa, Vilardi Synthesis and CO2 absorption capacity of distillated water based nanofluids IT
166 71 L *Sakurai, Feng, Sakai, Kansha The effect of walls in reforming the semi-batch reactor from a heterogeneous approach JP
167 72 KL *Simon, Cazin, Morchain, Augier, Liné TOMOPTV to investigate hydrodynamics in a mixing tank FR
168 31 L *Sasayama, Ono, Kosaka, Liu, Chen, Mochizuki, Matsuoka, Kuramoto Utilization of circulating fluidized bed system for continuous CO2 capture and selective conversion to CH4 or CO JP
169 75 L *Segneri, Borgogna, Verdone, Vilardi Waste to chemicals: modeling analysis of high temperature and direct melting gasification IT
170 75 L Yewale, Yang, Nazemifard, Papageorgiou, Rielly, *Benyahia Self-optimization of multistep reactions using reinforcement learning strategies UK
171 69 L *Fois, Pisu Pilot scale testing of humic acid extraction from Sulcis coal IT
172 32 L *Homem Alves César Ribeiro, Rouzineau, Meyer Application of triply periodic minimal surfaces (TPMS) on the design of new reactive distillation column packings FR
173 53 KL *Salehi, Prasad, Bradley Impact of temperature on powder's bed surface roughness in additive manufacturing UK
174 74 KL *Santana, Da Silva, Dos Santos, Marcelino Neto, Morales Effect of pipe diameter in vertical downward annular flow BR
175 75 L *Salucci, Grenman, Salmi, Di Serio, Tesser, Russo Intraparticle model for non-uniform active phase distribution catalysts in different reactor systems FI
176 67 L *Tamargo, Magallanes-Nava Dihydrolevoglucosenone as a neoteric bio-based solvent for green and sustainable materials PH
177 31 L *Hou, Salman Continuous wet granulation for pharmaceutical production: Effect of process time on twin screw powder caking using high percentage of lactose UK
178 71 KL *Salmi, Russo, Cogliano, Freites Aguilera, Alvear, Tolvanen Epoxidation of double bonds – mechanism, kinetics, transport phenomena and reactor technology FI
179 28 L *Richtr, Bures, Mazur, Zubov, Michal, Pocedic Mathematical modelling for up-scale of the flow batteries CZ
180 43 KL *Kumar, Vajglova, Simakova, Eränen, Mäki-Arvela, Peurla, Murzin Fine chemicals synthesis using clay extrudates catalytic materials: evaluation of reaction mechanism, physico-chemical and catalytic properties FI
181 74 L Heringer, Wapperom, Secuianu, Voskov, *Nichita A new three-phase phase equilibrium calculation method for CO2 storage in depleted reservoirs FR
182 73 L *Sa Controlling CO2 hydrate formation characteristics by using environment-friendly amino acids for carbon capture and storage applications KR
183 27 L *Tyraskis, Sumbharaju, Saric, van Delft Radically electrified e-methanol production via cl-HPAD purification NL
184 66 L *Mukherjee, Parmar, Meikap The overall hydrodynamic study related to the pressure drop and efficient removal efficiency of gaseous and particulate matter within a low-cost self-primed venturi scrubber having environmental sustainability and zero discharge emissions IN
185 42 L *Kornas, Mlekodaj, Tabor, Wierzbicki, Sklenak, Pilar, Tvorynska, Lemishka, Dedecek Activation of molecular oxygen over binuclear iron sites in various zeolite topologies CZ
186 11 L *Fernandez, Garcia, Diaz, Abanades, Garcia, Pericet-Camara Advanced CO2 capture process in energy-intensive industry through high temperature chemical looping to obtain ultra-high pure CO2 ES
187 25 L *Parmar, Mukherjee, Meikap Use of waste biomass for pyrolytic conversion to energy and sustainability IN
188 75 L Shen, Zhao, *Xi, Yuan Mechanism and kinetics study on polymerization of bio-derived polycarbonate from isosorbide: identification on the reactivity of diols with asymmetric hydroxyls CN
189 27 L *Raab, Fotachov, Melchior, Vu, Storck, Oesterschulze, von Harbou, Bart Enhanced heat transfer due to dropwise condensation caused by hierarchical structuring of polymer composites DE
190 27 L *Lee, Tantai, Lee Design of site-wide trigeneration systems with energy loss considerations TW
192 33 L *Düll, Happ, Häber, Deutschmann Optimized surface structures for intensification of CO2 absorption in a falling film absorber – a combined experimental and numerical study DE
193 41 L *Kircher, Döppel, Votsmeier Accelerating kinetic model discovery by global reaction neural networks with embedded stoichiometry and equilibrium DE
194 53 L *Sun, Salman Amorphicity control of lactose particles by spray drying UK
195 23 L *Gao Catalysts facilitated by spent lithium batteries for efficient hydrogen generation TW
196 55 L *Miranda-Zanardi, Cutipa-Cotacallapa, Llacho-Sarco Controlled release of iron in alginate and pectin aerogels PE
197 43 L *Colín-Luna, Zamora-Rodea, Vazquez-Flores, Aguilar-Pliego, de los Reyes, Ángeles-Beltrán, López Medina, Contreras-Larios, González Brambila, Tapia-Medina Effect of the H/C ratio in the hydrotreatment of eugenol-oleic acid blend to obtain renewable jet fuel using Ni-Pd catalysts on Zr-pillared clays MX
198 66 L Garcia, *Roque, Vallar, Galvez, Biona Evaluating health and economic outcomes from particulate matter reductions across three transition scenarios of Philippine Public Utility Jeepneys PH
199 12 L Costa, Costa, *Albuquerque, Pereira Implementing a network mixing technology for the ongoing generation of CO2 hydrates for Carbon Capture and Storage (CCS) PT
200 74 L *Staubach, Fröhlich, Hoffmann, Illner, Repke Investigation of the thermodynamics for a novel e-methanol process with limited experimental data using the VTPR equation of state DE
201 75 L *Folden, Aschmoneit Numerical modelling of coalescence frequency in bubbly multiphase flows DK
202 69 L *Caminada, Corbetta, Ostuni, Menghini, Bialkowski Optimizing e-MeOH process for successful industrial implementation CH
203 41 L *Perez Sena, Ciccarelli, Eränen, Medina, Cogliano, Di Serio, Wärnå, Leveneur, Russo, Salmi Semi-batch reactor modelling of a complex three-phase system: carbonation of epoxides on grafted catalysts FI
204 43 KL *Araujo Barahona, Goicoechea Torres, Ciaramella, Cavaleri, Eränen, Murzin, García Serna, Salmi Solid foam catalysts: paving the way for efficient sugar alcohol production FI
205 35 L *Robinson, Droegemueller, Simmons Static mixer assessment using a novel method for continuous PLIF UK
206 35 P *Hsu, Deng Using CFD to simulate the gas-liquid dispersion of two-stage mixing system with different impellers combination TW
207 66 P Cadondon, Aguila, Morillo, *Galvez Heavy metal detection using a portable spectrophotometric method for water quality monitoring PH
208 31 L *García-Maza, González-Delgado Water-Energy-Product (WEP) technical evaluation of hydrocracking process in a Latin-American refinery CO
209 75 P Haidn, Slavinskaya, Jocher, Askarova, Bolegenova, *Nugymanova A comprehensive kinetic modelling study of propane, propene, propyne combustion with data uncertainty analysis KZ
210 12 L *Dal Mas, Somoza-Tornos, Kiss Comparison of low-carbon routes for chemicals production: techno-economic and environmental performance NL
211 41 L Orabona, Capasso, Taddeo, Eränen, Perez Sena, Verdolotti, Di Serio, Murzin, Salmi, *Russo Condensation of ethyl levulinate with phenol on Amberlyst-15: kinetics and modelling IT
212 65 L *Cabezas, Plaza, Villarroel, Quijada-Maldonado, Romero Cross-linked PS/glucose DES membrane with superior water pervaporation performance for purification of diethyl succinate from esterification process CL
213 76 P *Sadenova, Shoshay, Beisekenov Development of “green” technology for the extraction of metals from various sources KZ
214 65 L *Merlet, Aguilera, Cabezas, Pino-Soto, Romero, Quijada-Maldonado Development of separation method utilizing composite ionic liquids-membranes for extracting aromas from agricultural by-products via COSMO-RS CL
215 64 L *Rojas Quimbaya, Cuervo, Serrato Enhancing lactic acid production from milk whey: The role of lactose, nitrogen source and hydrolysis in fermentation process CO
216 15 P *Cruz, Russo, Moldes, Vecino Evaluation of olive mill wastewater sludge for the direct production of bisourfactants ES
217 14 L *Li, Petinatto, Campardelli, Perego Extraction and encapsulation of bio-actives from tomato waste for food and biomedical applications IT
218 33 L *Rodrigues, Maldonado, dos Santos, Marcelino Neto, Liné, Morales Identification of Taylor bubble, wake and liquid slug wire-mesh sensor and pressure transducer for upward gas-liquid slug flow BR
219 66 L *Taligrot, Wurtzer, Monnot, Geslin, Moulin, Moulin Link between water quality after membrane processes and bacterial growth in drinking water distribution systems FR
220 65 L *Taligrot, Wurtzer, Monnot, Moulin, Moulin Low-pressure reverse osmosis for drinking water production: viral retention on different scales FR
221 66 L *Sadenova, Beisekenov Modelling neural network analysis for controlling soil degradation and related air and water pollution JP
223 68 L *Saad, Schlapp-Hackl, Uusi-Kyyny, Alopaeus, Sixta Recovery of protic ionic liquid [mTBDH][OAc] by short path distillation FI
224 13 L *Roccaro, Gagliano Removal of PFAS from water by adsorption processes and related costs IT
226 35 L *Ćosić, Čelan, Crnogorac, Jozić, Kuzmanić The effects of impeller diameter in sonicated and silent system on crystallization kinetics of borax decahydrate HR
227 45 L *Willer, Preuster, Wasserscheid The role of evaporation in a catalytic multiphase reactor for dehydrogenation of liquid organic hydrogen carriers DE
228 64 L Schoop-Zipfel, Appl, Moser, Pörtner, *Hass A novel process control system designed for enzymatic processes employing digital-twin based control strategies DE
229 57 L *Tirano, Nuñez An empirical model for the kinetics of highly ordered TiO2 nanotubes synthesis by electrochemical anodization by using Ti as cathode CO
230 71 KL *Leveneur Combining isothermal and adiabatic mode experiments for kinetic constants estimation: application to the hydrogenation of 5-HMF FR
231 73 L *Amano, Louhi-Kultanen Process monitoring of freeze crystallization based on electrical conductivity of sulfate solutions FI
232 55 L *Tirano, Bredol Structure and morphology of nickel-doped titania nanotube prepared by direct and pulse current electrodeposition CO
233 74 L *Wapperom, Heringer, Nichita, Voskov The use of a hydrate equation of state in multiphase flash calculations NL
234 25 L *Pereira, Lagarteira, Alves, Dias, Mendes Thin-film substrates for catalytic methane splitting reactors PT
235 25 L Javed, *Singh Green solvent-based microflow extraction of precious metals from waste photovoltaic panels IN
236 36 L Faridatul Ain, *Mahmud, Heggs Drying of maltodextrin solutions in a laboratory-scale co-current spray dryer UK
237 28 L *Gráf, Richtr, Mazúr, Pocedič, Kosek Flow batteries with zinc electrode – deposition and battery operation in various pH CZ
238 41 L Ramírez, Badia, *Soto, Iborra, Tejero, Bringué Isomannide production by mannitol dehydration over acidic ion-exchange resins: Effect of resins morphology on their catalytic activity ES
239 75 L *Döppel, Votsmeier Robust mechanism discovery with atom conserving chemical reaction neural networks DE
240 65 P *Hovorka, Randová, Kohout, Vopička, Čížek, Izák Sorption and permeability of enantiomers in chiral polymer membranes based on cellulose triacetate, biaxially oriented polypropylene and NafionTM CZ
241 33 L *Obligado, Orvalho, Terentyak, Ruzicka, Cartellier Time-dependent hydrodynamics of bubble columns FR
242 43 KL *Soto, Canadell, Badia, Ramírez, Bringué, Fité, Tejero Unveiling the role of resins structure and Pd or Cu active sites on sintering, leaching and catalytic activity in the MIBK one-pot synthesis ES
243 72 L *George, Danda, Wehinger Modeling mass transport in catalytic foams – a simplified CFD approach for the application in fixed-bed reactors DE
244 23 P Manabayeva, *Tungatarova, Murzin, Baizhumanova, Shoganbek Impact of operating conditions on catalytic activity of Ni-Fe-Al catalyst in synthesis of H2-containing substances KZ
245 56 L Wusiman, *Taghipour Portable fluorescence sensor for measuring chemical contaminants in water CA
246 25 P *Colín-Luna, Gómez Tenorio, García-Martínez, Tapia-Medina, Medina-Mendoza, García-Martínez, Zamora-Rodea, Núñez-Correa Removal of highly refractory sulphur compounds contained in diesel fuels by mesoporous adsorbents modified with Zr: Cu loading effect MX
247 36 L *Nedumaran, Misiulia, Antonyuk Development of a recirculation system for cyclone separator to handle pm2.5 gas flow and reduction of the overall pressure drop using a deswirler DE
248 44 P Kassymkan, Assylbekov, Orazbekova, Zheksenbaeva, Xanthopoulou, Vekinis, Tungatarova, *Baizhumanova Catalytic oxidation of methanol and ethanol on Cu and Ce catalysts KZ
249 60 L *D'Agostino, Pettinato, Casazza, Perego SoLVE: an innovative approach to recover polyphenols from olive pomace IT
250 28 L *Miloudi, Abdelouahed, Larara Smart control for PV system storage DZ
251 28 L *Mazúr, Richtr, Graf, Bureš, Hnat, Paidar, Pocedic Optimization and scale-up of zinc-air flow battery for stationary applications CZ
252 33 L *Verne, Sadoudi, Guemarche, Lecacheux, Ruiz On the drop falling volume from a capillary needle in the dripping regime FR
253 12 L Marcos-Madrazo, Merino-García, Calvo de la Fuente, Malagón-Picón, Cloete, Pacchiana, Ricci, Bernardes-Figueirêdo, Cámara-Sanz, Guerrero-Belza, Aragón-Briceño, Real-Salas, *Diaz-Sainz, Irabien Production of formic acid in the cement industry via CO2 electrochemical reduction ES
254 36 L *Ashtiani, Friess Thin film formation of biopolymer on magnetic graphene oxide via applying electrodeposition process for advancing of methylene blue dye removal CZ
255 51 P Lee, Nguyen, Kim, *Nah Polarized ferroeletric polymer composite for absorption-dominant electromagnetic interference shielding KR
256 60 P *Cancela, Iglesias, Sánchez, Picos Impact of invasive alien species Tradescantia fluminensis waste on physico-mechanical properties of industrialy made paper ES
257 22 P *Mohamed, Al-Asady, Felder, Lister, Salman Roller compaction; decreasing amount of fines UK
258 33 L *Alghanduri, Etoumi Effect of temperature on yield stress of waxy crude oil LY
259 36 L Etoumi, *Alhanash, Almabrouk Simulation and optimization of Sahel gas sweetening unit in Libya LY
260 63 P *Ali Ahmad, Salam Investigating the adsorption of pharmaceuticals onto polyethylene microplastics in water LB
261 66 L *Raj, Kumar, Samanta Construction of SnS2/MIL-88A(Fe) heterostructure for boosting charge transfer assisted with peroxymonosulfate for the efficient visible-light driven degradation of Norfloxacin IN
262 64 P Herrera-Rodríguez, Parejo-Palacio, *González-Delgado Exergetic assessment of dual oil and biochar production from creole avocado in north-Colombia CO
263 64 L Herrera-Rodríguez, Parejo-Palacio, *González-Delgado Inherent safety analysis and sustainability evaluation of dual production of oil and biochar from creole avocado CO
264 64 P Herrera-Rodríguez, Parejo-Palacio, *González-Delgado Technoeconomic evaluation of a creole avocado based biorefinery in north Colombia CO
265 24 P Park, *Lee Analytical study on evaluation of energy self-sufficiency for smart farm integrated with renewable energy KR
266 77 P *Bitchikh, Haouche, Bouhadda, Yahi, Smakghi Hazard identification and risk assessment for the chemical process industry DZ
267 65 L *Cabezas, Azocar, Aguirre, Morales, Plaza, Olea, Zurob Succinic acid recovery from Yarrowia lipolytica model fermentation solution by dialysis using phosphonium ionic liquid as extractant phase CL
268 65 L Molina Fernandez, Garcia Alvarez, Sang Sefidi, Sparenberg, Cocon, *Luis Novel CO2 capture and conversion process using membrane technology BE
269 11 KL *Luis Sustainable carbon capture: challenges and perspectives BE
270 65 L *Li, Liu, Wang, Pan, Zhang, Zhao Polyacrylonitrile membrane porous structure tailoring and its application in composite membrane preparation CN
271 64 P *Cancela, Iglesias, Sánchez, Picos Waste from the wood industry, bark and leaves of Eucalyptus globulus, as a sustainable source of pigments for the graphic industry ES
272 74 L *Ali, Cha, Moon Investigating the behavior of amine speciation on the heat of CO2 absorption in the blend of aminoehtylethanolamine and diisopropanolamine KR
273 33 P Shirokov, Kostovčik, Orvalho, *Basařová Effect of viscosity and surface tension on bubble swarm dynamics CZ
274 71 L *Russo, Freites Aguilera, Salmi Shallow beds are not plug flow reactors – what to do in parameter estimation? FI
275 36 L *D. S. Cordeiro, Figueiredo, Fonseca, Voroshylova, Marques Magnetic ionic liquids for greenhouse gases capture: Insights from molecular dynamics simulations PT
276 60 L *Zhao, Liu, Zhang, Pan, Tang, Yu Nanofiltration technology for salt recovery from high salinity wastewater – promoting zero discharge CN
277 65 L *Zhao, Yu, Liu Spiral-wound organic solvent nanofiltration membrane modules for dewaxing solvent recovery CN
278 33 KL *Jin, Weiland, Hoffmann, Schlüter Direct numerical simulation of bubble collision, bounce and coalescence in bubble-induced turbulence DE
279 44 P Palcheva, *Kaluža, Petrova, Dimitrov, Karashanova, Tyuliev, Jirátová Alumina supported sulphide NiMoW catalysts for the hydrodesulfurization of 4,6 dimethyl dibenzothiophene CZ
280 44 P Moravčík, *Kaluža, Soukup, Kocík Preparation of sulphide catalysts for heteroatom elimination in hydrocarbon refining CZ
281 75 L *Vaccari, Guastaferro, Tognotti Advancing biofuel production: Innovating analysis and simulation methodologies for biomass gasification systems IT
282 43 L *Kaluža, Sanchez, Kocík, Palcheva, Soukup Carbon carbon coupling of primary bio alcohols over solid chemo catalysts CZ
283 33 L *Kalandadze, Gomidze, Tsintsadze Investigation of the influence of mechanical and electrical parameters on red blood cell microcirculation GE
284 16 L *Vásquez Lecaros, Araujo Pantoja Process design of permanent hair dyes made from plants PE
285 23 L *Guastaferro, Marchetti, Annunzi, Vaccari, Tognotti, Nicolella Simulation case study for renewable energy production from plastic solid waste pyrolysis IT
286 15 L *Marchetti, Guastaferro, Annunzi, Vaccari, Tognotti, Nicolella Towards sustainable solutions: comprehensive exploration of two-step pyrolysis for converting diverse plastic waste into added value products IT
287 12 L Arias-Lugo, Gómez-Coma, *Diaz-Sainz, Irabien Development and evaluation of a CO2 capture system through hollow fiber membranes for applications with real gases ES
288 62 L *Kenyeres, Kummer, Abonyi Stochastic simulation and operational analysis of waste separation systems HU
289 51 L *Kang Application of novel spherical high purity mesoporous silica gel composite materials in metallocene polyethylene catalysts CN
290 25 L *Itaya, Sakane, Sugiura, Suami, Kobayashi Functional reaction performance of decomposition and synthesis for energy conversion by non-thermal microwave plasma JP
291 51 L *Mehdi Sefiani, Pérez-Puyana, Sepúlveda Ferrer, Romero García, Domínguez-Robles, Chicardi Augusto Optimization of titanium foams by the inclusion of hydrogels as a drug delivery system. A preliminary study ES
292 53 P *Lee Preparation of water-soluble microspicules using hyaluronic acid KR
293 43 L Sun, *Peng Progress of hydrocracking process intensification CN
294 35 L *Shaikh Mixing characteristics of novel 3D sparse grid design AE
296 36 L *Hernández Fernández, Iniesta-López, Sánchez-Zurano, Garrido Hernández, Pérez de los Ríos, Quesada-Medina, Hernández-Fernández Enhanced stability and selective metal ion separation using polymeric inclusion membranes incorporating ionic liquids ES
297 36 L *Sauer, Sklenář, Šmejkal, Přibyl Orthogonal separation techniques for chiral chemicals in continuous-flow millifluidic systems CZ
298 14 L *Chang PGASO: A cell editing technology to produce nutrition TW
299 23 L *Ibarra-Mojica, Duarte Rodriguez, Gélvez Higuera, Prada Soto, Saucedo Serrano, Kafarov Assessment of the energy potential of high mountain agricultural residual biomass in the municipalities of Silos and Tona - Colombia CO
300 31 L *Přibyl, Sauer, Kovářová, Kralik, Slouka Continuous synthesis and separation of mandelic acid enantiomers in orthogonal milli-fluidic devices CZ
301 64 L Ling, Chon, Teoh, *Thangalazhy-Gopakumar Hydrothermal oxidation of palm empty fruit bunches using hydrogen peroxide MY
302 36 L *Čížek, Otmar, Kohout, Izák Chiral anion exchanger based on α-methylbenzylamine for enantioselective separation of racemic acids CZ
303 32 P Xu, Iyer, *Luis Integration of reaction and separation via reactive pervaporation BE
304 15 L *Alamani, Aberilla, Divinagracia, Jucar, Caabay Managing wastes through extended producers responsibility: Challenges and opportunities from engineering to policy PH
305 66 L *Alamani, Dela Cruz, Ayroso, Casabuena, Dela Cerna, Borines, Caspillo, Ananoria Mechanochemical devulcanization of waste rubber: Influence of rancid oil to the extent of degradation PH
306 65 KL *Petrusová-Sedláková, Morávková, Stanovský, Dytrych, Izák, Jansen Organic vapour permeation in dense rubbery membranes: Experiments versus prediction by solubility parameters CZ
307 64 L Hernández-Ramos, Morales, de Hoyos-Martínez, Erdocia, *Sillero Rediscovering the potential of urban pruning waste via renewable biorefinery solutions ES
308 11 L *Stefanelli, Vitolo, Francalanci, Malquori, Puccini Scaling up production of Li4SiO4-based pellets for high-temperature CO2 capture in a fixed-bed reactor IT
309 26 L *Jiménez, Ortiz, Camarillo, Rincón, Martínez TiO2-Cu photocatalysts for the photoelectrochemical reduction of CO2 to fuels: synthesis, characterization and testing of photocatalytic activity ES
310 60 L Salucci, Fortunato, Bellucci, Francesca, Saxen, *Russo Valorisation of ferric oxalate dihydrate coming from pickling processes through thermal conversion processes IT
311 17 L *Pagsuyoin Wastewater-based epidemiology: applications and opportunities for community health surveillance US
312 26 L *Iniesta-López, Hernández-Fernández, Sanchez-Zurano, Garrido, Pérez De Los Ríos, Quesada-Medina, Hernández-Fernández Characterization of polymeric ionic liquid inclusion membranes as proton exchange membranes for application in fuel cells ES
313 72 L *Helvacı, Uludağ, Karakaş A model for reversible solid-gas reaction between NH3 and CaCl2 for chemical heat pump applications TR
314 73 L *Yessim, Ahmatova, Kurmanbayeva, Zhurtbayeva, Abdumutalov, Begimova Biologically active substances of water-ethanol extraсts from medicinal dandelion (Taraxacum officinale) KZ
315 41 KL *Kobayashi, Moriyama, Shiina, Toda Effects of particle addition on kinetics of sonochemical degradation of phenol JP
316 45 KL Hao, Song, Liu, Liu, Wang, *Xu Enhancement of light field uniformity via internal components in a circular tube reactor CN
317 13 L *Maiti, Meikap Facile synthesis of porous biochar derived from green coconut shell for adsorption of aqueous phase contaminant IN
318 43 P *Mambetova, Makayeva, Yergaziyeva Hydrogenation carbon dioxide to methane over NiO/CeO2-Al2O3 catalyst KZ
319 25 L Chatterjee, *Meikap Chemical beneficiation of low-rank Indian thermal coal using ammonium-bi fluoride solution IN
320 64 L *Hernández-Ramos, Esteves, Carvalho, Labidi, Erdocia Impact of lignin source on the synthesis and performance of polyurethane wood adhesives ES
321 74 L *Vopička, Durdáková, Číhal, Tvrdý, Šercl, Melčák, Heyda, Boillat, Trtik Interfacial phenomena in multiphase systems at high pressures revealed using neutron imaging CZ
322 41 L *Held, Bajohr, Kolb LOHC as liquid phase in three phase methanation – Influence of the hydrogenation reaction of dibenzyl toluene on methanation reaction kinetics DE
323 75 L *Studeník, Plachá, Isoz, Kočí Pore-scale model of soot oxidation in catalytic particulate filters CZ
324 51 L *Khairunnisa, Mansor, Nuraisyah, Manaf, Jusoh, Yamanaka Potassium hydroxide activation of porous soils: effect of physicochemical structure on carbon dioxide adsorption JP
326 45 L *Kuramoto, Fukushima, Ono, Sasayama, Kosaka, Chin, Liu, Matsuda, Morimoto, Matsuoka, Tatsumoto, Tadokoro, Shono Study and development of dual-function material (DFM) and continuous CCU (Carbon-Capture and Use) process JP
327 68 P *Ciocirlan, Sima, Stefaniu Volumetric and viscometric studies of chitosan monomers in aqueous natural deep eutectic solvent solutions RO
328 44 P *Sun, Zhao, Li, Guo, Wang, Xiang Promotional effect of Sr modification on the catalytic oxidation of hydrogen chloride to chlorine over Cu/Y zeolite catalyst CN
329 33 L Simon, Khalfaoui, Cockx, *Liné Bubble plume hydrodynamics in complex fluids FR
330 33 L *Semlerová, Harrandt, Havlica, Orvalho, Zedníková Deformation and breakup of bubble interacting with vortex structure in the presence of various surfactants CZ
331 66 L Peixoto, Faria, Hatem, Pinto, Madureira, Teixeira, Pereira, *Slezakova Indoor air quality in public schools – Preliminary results and progress of EDC(Mind)2 project PT
332 27 L *Cao, Luo, Barros, Tang, Raston Vortex fluidic-mediated transesterification: Advancing Mongongo fatty acid ethyl esters production for haircare applications AU
333 64 L *Morales, Marcial, Olaizola, Hernández-Ramos, Erdocia, Sillero Birch bark beauty: enhancing cosmetic potential through optimised bioactive compound extraction ES
334 21 P *Mambetova, Anissova, Serkebayev, Yergaziyeva, Makayeva CO2 capture on composite sorbents synthesized by different methods KZ
335 65 L *Mambetova, Yergaziyeva, Dossumov Study of the sorption properties of natural zeolite from the Tayzhuzgen deposit modified with alkali metal oxides KZ
337 72 L *Ganguli, Kenig CFD simulations of micro-bubble dynamics in a rectangular bubble column using Eulerian and VOF simulations IN
338 51 L *Floreková, Saeed, Friess Novel Mixed Matrix Membrane combining magnetic MOF UiO-66-NH2 and Pebax1657 for improved CO2/N2, CO2/CH4 and O2/N2 separations SK
339 51 L *Yamanaka, Khairunnisa Preparation and characterization of mesoporous calcium carbonate JP
340 60 L *Lutfiananda, Setiyawan, Septianto Coal fly ash utilization in wastewater treatment plants ID
341 35 L Williams, Vashisth, Tsochataridou, Rielly, *Ozcan-Taskin Blending performance of batch rotor-stators UK
342 33 L *Hänsch, Lehnigk, Schlegel Data-centric model validation with growing bubble column data sets DE
343 36 L *Motang, Knoetze, Schwarz Hydrodynamics in a packed column with supercritical carbon dioxide and silicone oil or 1-dodecanol ZA
344 76 L *Teixeira, Benyahia The interplay between computer-aided retrosynthesis and flow chemistry for effective greener-by-design synthesis of active pharmaceutical ingredient UK
345 33 KL Hébrard, *Dietrich Enhanced modeling of oxygen mass transfer in surfactant solutions: Integrating hydrodynamics and physico-chemical phenomena from two decades of experimental data FR
346 64 L *Erdocia, Morales, Hernández-Ramos, Sillero Do not leave the leaves behind: prospecting urban pruning leaves extractives for film production ES
347 81 L *Dietrich Challenge thinking: Challenge-Based Learning pedagogy applied to sustainable chemical engineering FR
348 36 P *Urzúa, Parraguez, Borges, Inestrosa-Izurieta, Valenzuela In search of efficient purification of lithium brines by simultaneous extraction of magnesium and boron using a novel ionic liquid CL
349 33 L *Terentyak, Orvalho, Zedníková Liquid hydrodynamics in bubble column CZ
350 45 L *Becka, Bajohr, Kolb Methanol synthesis in a spatially resolved profile reactor DE
351 23 L *Marek, Mazur Organic redox active species for microemulsion based electrolytes in flow batteries CZ
352 82 L *Jahoda, Rejl, Valenz Project-based learning in chemical engineering: a case study on Process Engineering Project CZ
353 12 P *Micciancio, Di Palma A review on carbon dioxide capture technologies in the industrial sector IT
354 65 L *Marsico, Brunetti, Catizzone, Migliori, Barbieri Membrane gas separation integrated in the process for the valorisation of CO2 contained in a biogas stream IT
355 74 KL *Zhang, Yang, Wang, Yi The evolution law for thermal breakage behavior of tilted glass under high-temperature loading CN
356 52 L *Nyklíčková, Stavárek, Havlica, Kokavcová The impact of geometric parameters of 3D structured beds in trickle-bed reactors under single-phase flow condition CZ
357 74 KL Zhao, *Lu, Zhang, Li A study on the thermogravimetric dynamics of burning process of Chinese fir with different degrees of biological aging CN
358 44 L *Soukup, Topka, Balabánová, Šolcová Preparation of nanofibrous catalysts by electrospinning technique CZ
359 66 L Gaviola, Lacang, Medina, Tria, *Lerona Nutrient recovery facility of ammonia & phosphorus as struvite crystals from municipal septage and swine lagoon water in Cebu City, Philippines PH
360 58 L *Oliveros, Banania, Ang, Lerona Production of extruded-grade polyamide (Nylon 6) production from cyclohexanone via ammoximation and vapor-phase Beckmann rearrangement PH
361 73 L Almazan, *Horlador, Mesa, Lerona Rare Earth Element (REE) recovery plant from Philippine phosphogypsum tailings (PHILPHOS) via acidic leaching and precipitation PH
362 33 L *Liao, Hessenkemper, Lucas, Ma Some aspects on CFD modelling of a homogeneous bubble column regarding the effects of surfactants DE
363 75 L Amorim, *Filpe, Matos A carbonator model with deactivation based on the adsorbent chemical composition PT
364 76 L *Devlieger, Flacher, Arnold, Ubeira, Clair Automation and chemical engineering: An automatic 1 Liter scale-up system for pharmaceutical processes intensification FR
365 65 L *Khan, Khan Nanosheets incorporated mixed matrix membranes for efficient CO2 separations SA
366 11 L *Chianese, Dal Pozzo, Cozzani Cascading use of waste streams in the calcium looping CO2 capture process: the case of air pollution control residues from different industries IT
367 33 L *Weiland, Hoffmann, Schlüter Development and implementation of a Lagrangian model to estimate the bubble breakup in bubbly flow DE
368 75 L Santos, Foronda, Meziat, Martins, *Santos Development of Artificial Neural Network and Decision Tree models for fault detection and diagnosis in naturally flowing offshore oil and gas producing wells BR
369 75 L *Dias, Motta, Grillo, Pradelle, Santos Development of machine learning models for predicting normal and abnormal conditions in diesel engines BR
370 31 L *Jaklová, Stavárek, Vychodilová, Maliková, Salmi, Klusoň Effect of sonication on phase transfer catalysis reaction in continuous flow synthesis CZ
371 15 L *Sklenářová, Kolářová, Drápela, Vaszi, Perner, Kosek Efficiency of triboelectric sorting of plastic waste: the role of the materials used to charge the waste in the tribocharging unit CZ
372 13 L *Haidl, Prokopová, Gebouský, Pivokonský Electrocoagulation for enhanced DOC removal in the drinking water treatment process CZ
373 13 L Ribeiro, Xavier Ferreira, Rodrigues, Grillo, *Santos, Torem Feature selection and statistical analysis of wastewater treatment plant operating conditions to identify the main operational variables BR
374 33 L *Orvalho, Terentyak, Zedníková, Basařová, Obligado, Ruzicka From bubble formation at orifice to local and global hydrodynamics of bubble columns CZ
375 23 P *Khan, Khan High performance water splitting catalyst from laser-annealed metal organic frameworks SA
379 26 L Patel, Ajayi, *Kalyvas Modelling mass transport in anode-supported solid oxide fuel cells UK
380 73 L *Pipíška, Mařík, Haidl, Šulc, Rejl Observation of distillation process using thermal imaging camera CZ
381 75 P *Utegenova, Sadenova, Sagdoldin Optimization of parameters for the synthesis of ceramic materials using powder metallurgy and computer modeling methods KZ
382 26 L *Schimon, Klusoň, Dzik, Homola, Stavárek Photo-degradation pathways of selected antibiotics degraded by visible light over g-C3N4 thin film in photomicroreactor CZ
383 15 L *Rahmat, Drünert, Weyand, Moser, Maier, Fleischmann, Dietrich Power-to-X for sustainable glass production (syn-methane, syn-methanol and direct H2 combustion) – a techno-economic and life cycle assessment DE
384 15 L *Klimošek, Řiháková, Dendisová, Jindrová, Kosek Reshaping plastic waste to resource: upcycling of polyolefins and textiles CZ
385 66 L *Nurfarhana, Asikin-Mijan, Yusoff Single-step synthesis of nitrogen-doped porous carbon by NaNH2 from natural rubber for CO2 capture MY
386 72 L *Mařík, Haidl, Pipíška, Šulc, Rejl Thermal imagining of evaporating liquid stream CZ
387 74 L *Bouz, Klimošek, Kosek Thermodynamically aided design of solvent-based polymer recycling process CZ
388 23 L Syahir Haziq, *Abdul Manaf Unlocking the potential synergy between MXene and graphene for efficient photothermal conversion for solar energy storage application MY
389 31 L Antep, *Kaymak Design and control of an energy efficient process for ethyl levulinate production using double reactive distillation columns TR
390 33 L *Schlüter, Hofmann, Rautenbach, Weiland, Nickel Importance of bubble size distribution and gas hold up heterogeneities on scale up of gas-liquid reactors DE
391 64 P *Ferreira, Sampaio, Mariguetti, Thoméo Extraction and granulometric analysis of Metarhizium anisopliae spores in mechanical shaker for cyclone sizing DE
392 65 L *Stanovský, Izák Flue gas treatment with membranes based on polymers of intrinsic microporosity and other alternative membranes CZ
393 27 P Chen, *Lee, Jiang, Tseng, Chen Energy-efficient comparison of various thermally coupled configurations for indirect distillation system TW
394 41 P *Nagiev, Gasanova, Nagieva, Mammadova Kinetics of peroxidase oxidation of ethyl alcohol to acetaldehyde on the per-FTPhPFe3+OH/Al2O3 bioimitator AZ
395 76 P *Ferreira, Thoméo Extraction of Metarhizium anisopliae spores in a rotating drum DE
396 27 P *Acosta-Esalas, García-Maza, González-Delgado Computer-aided exergetic evaluation of a hydrocracking process in a Latin American refinery CO
397 69 P *García-Maza, Acosta-Esalas, González-Delgado Environmental evaluation of a large-scale Gasoil hydrocracking process in a Latin American refinery CO
398 64 L Inocencio-García, Solarte-Toro, *Cardona Alzate The use of carbon dioxide (CO2) as oxidizing agent on syngas quality using lignocellulosic biomass as feedstock for gasification CO
399 65 P *Aninwede, Kratky CO2 capture from flue gas using HFM module: Experimental analysis and dimensionless modelling CZ
400 64 P Puello-Mendez, Pasqualino, Nabarlatz, Baldiris-Navarro, *Lambis-Miranda Analysis of temperature as a relevant factor in the pyrolysis process, for the valorization of corn-cob waste (Zea mays) CO
401 42 P *Rattanaphra, Kingkam, Nuchdang, Phalakornkule, Suwanmanee Recrystallization of tri-sodium phosphate from Thai monazite concentrate decomposition as solid catalyst for biodiesel production TH
402 58 L *Hu, Gao, Zhao Green preparation of TPU/MWCNT bead foam with high electromagnetic interference shielding by one-step foaming and sinter molding CN
403 76 L *Zhong, Chen, Hu, Zhao A novel semi-continuous preparation mode of ultra-low density thermoplastic polyurethane foam CN
404 51 L *Chen, Yu, Zhong, Hu, Zhao Preparation and structure regulation of microcellular foams and devices with low dielectric properties CN
405 64 P *Azmi, Che-Muda, Mohamad Puad, Ali Effect of neutralizing agents and hydrolysed cassava peel on lactic acid production by Rhizopus microsporus MY
406 15 KL *Zentel, Viernickel, Pietrasch, Busch Contributions to sustainable polymer materials and polymerization processes DE
407 Lee, *Jeong Annealing effects on particle and pore size distribution of BaTiO3 nanopowders and grain growth kinetics KR
408 *Wang, Zhang, Liu, Qiu, Luo Application of deep learning based image recognition methods for multiphasic microflow research CN
409 *Irabien Decarbonization, circular economy and hydrogen ES
410 *Lee, Jang Effects of barrel temperatures on extrusion behavior of screw extruder for 3D printing KR
411 *Sadykov, Bakkara, Osserov, Artykbayeva Mechanochemical activation of aluminium powders with organic modifiers KZ
412 *Jiang, Zhai, Zhao, Xi Synthesis and characterization of high toughness copolyester from bio-based 2,5-furandicarboxylic acid and plant oil-derived fatty acid CN
413 *Kang, Kang, Choi, Kim, Seong, Kim Synthesis and metal cation adsorption behaviour of magnesium-aluminium silicates composites for purification of high-purity polyols KR
414 *Yamaguchi, Arai Understanding molecular interactions at the adhesion interface between amorphous thermoplastic starch and biodegradable polyesters JP
415 Huelgas, Apostol, Quisao, *Orbecido, Promentilla Wastewater-based epidemiology for forensic drug intelligence in the Philippines using the SWOT-AHP-TOWS process PH
416 Bourafa, *Belhachemi Optimizing the production and characterization of activated hydrochar derived from date pits biomass DZ
417 *Merkher, Kontareva, Sizikov, Leonov Luminescent colloidal Ag-In-S nanoprobes for metastatic potential of TNBC cells IL
418 *Griehl, Sanchez Medina, Sundmacher Rapid phosphine ligand discovery in homogeneous catalysis: Bayesian optimization approach for low-throughput experimentation DE
419 *Begimova, Nechepurenko, Karlova, Kurmanbayeva The choice of the optimal method for extracting biologically active substances from plants using the example of a Dandelion (Taraxacum officinale) KZ
420 *Liu, Tsai Biomass and triterpenoids productions via Inonotus hispidus solid-state fermentation TW
421 *Macheca, Tichapondwa, Mapossa Development of organo-bentonites using protonated dimer fatty acid-based polyamide chains as ion exchangers: An alternative to conventional cationic surfactants MZ
422 Microsse, *Macheca, Ndalamba, Luposo, Tichapondwa Remediation of cationic and anionic dyes from aqueous systems using yellow Mozambican bentonite clay MZ
423 *Pareja-Sánchez, García-Moreno, García-Ruiz Valorization of olive mill wastewater: Extracting high-value polyphenols for circular bioeconomy ES
424 *Barboni, Petlitckaia, Santoni Exploring sustainable composites: Recycling HDPE and PP plastics with cork oak for material development composites FR
425 *Chun, Seo, Han Tactile multimodal sensor system inspired by cutaneous mechanoreceptors KR
426 *Van der Bruggen, Acevedo, John Options for resource recovery from reverse osmosis brines BE
427 *Kortuz, Kaps, Seidel-Morgenstern Experimental evaluation of forced periodic reactor operation for methanol synthesis DE
428 *Sil, Dhal, Chhetri Optimization of supercritical fluid extraction for enhanced yield of gingerol compounds from ginger oleoresin: a pilot-scale study IN
429 *Šalić, Ćurić, Anđelović, Krog, Valinger, Jurinjak Tušek, Zelić Intensification of hydrogenase production by cultivating Ralstonia eutropha H16 cells on different synthetic mediums HR
430 Ding, Lo, *Yu A mass transfer study for CO2 chemical absorption in rotating packed beds TW
431 *Jurinjak Tušek, Ćurić, Anđelović, Krog, Valinger, Šalić, Zelić Biohydrogen production: Cultivation of Ralstonia eutropha H16 on synthetic media and process optimization HR
432 *Bakkara, Artykbayeva, Maten, Zhapekova, Sadykov Production of thermal insulation materials using the SHS method KZ
433 *Shayegh, Alipoor, Shamkhali, Shayegh, Hakimaneh Study on enhancement of mechanical properties and translucency of nano-zirconia particles for dental applications IR
434 *Vega-Urrutia, Trejo-Zárraga, Marroquín-Sánchez, Vega-Merino ULSD production from catalytic hydrodesulfurization of middle petroleum distillates and biodiesel blends MX
435 *Romero, Cardoza, Contreras, Castro Organosolv pretreatment of vine shoots for lignin and fermentable sugar production ES
436 *Jiménez-Tototzintle, Belhadj-Mohamed, Dafinov, Montané Calaf, Medina, Constantí Catalytic depolymerization of plastic waste to obtain hydrogen and fossil fuels ES
437 *Galán-Martín, Contreras, Castro Unlocking biorefineries with carbon capture and storage: A case study of carbon-negative olive oil production ES
438 *Khelassi, Benabdallah, Fertas Practical identification, assessment of interaction and control of binary distillation column UOP3CC DZ
439 *Randák, Wutz, Jirout Modelling liquid-solid mixing in the new lattice Boltzmann software M-Star, with focus on particle drag force descriptions CZ
440 *Krupica, Dostál, Jirout Resistor network approach to thermal conductivity in porous media CZ
441 Mhanna, Marchetti, *Lalleman, Martin, Favergeon Impact of over-oxidation on the dissolution of uranium oxides in nitric acid FR
442 Muñoz, *Ruiz, Espínola, Martín, Moya Biotechnological use of Penicillium sp. 8L2: Cu(II) biosorption by and synthesis of CuO-NPs ES
443 Imronshoev, Kuxina, *Begimova Extraction and determination of the quantitative content of 3-methylquercetin in above-ground parts of "Eremurus tianschanicus" (Foxtail) KZ
444 *Huckins, Fu, Szczepanski The effect of cellulose nanocrystal integration on methacrylate-based dental adhesives US
445 *Gahleitner, Albunia, Mileva, Gall, Duscher What is necessary for improving circularity of conventional polymers? AT
446 *Weckhuysen Towards the refinery of the future: Advances in operando spectroscopy and microscopy of heterogeneous catalysts NL
447 *Muccioli, Meloni, Palma Electrified catalysts for the direct dehydrogenation of propane to propylene: sustainability and process intensification IT
448 *Takeuchi, Nagahashi, Oishi, Asako, Takeuchi, Hashioka, Kajiwara, Watanabe Heat transfer and particle flow for tube bundles immersed in internally circulating fluidized beds JP
449 Meloni, *Cafiero, Renda, Martino, Pierro, Palma Ru- and Rh- based catalysts for CO2 methanation assisted by non-thermal plasma IT
450 *Son, Park, Kim, Lee Study of copper electrolytic separation from recovered valuable metals using high-temperature reduction and melting processes in spent lithium-ion batteries KR
451 *Saraceno, Renda, Meloni, Giaconia, Palma Catalytic OBSiC foam for the hydrogasification of plastic waste IT
452 Yamamoto, Kido, Sawai, Imai, *Naoe Open cultivation of microorganisms in water-in-silicone oil Pickering emulsions stabilized by stearate microparticles JP
453 *Morović, Drmić, Babić, Košutić Enhancing N-nitrosamine rejection via decylamine and 1,10-diaminodecane plugging of RO membranes HR
454 *Žák, Moucha Liquid dynamics in stirred tank reactor CZ
455 *Chianese, Vaiano, Iervolino, Palma Catalysts for CO2 hydrogenation to methanol IT
456 Bouřa, Kamenický, Moucha, *Žák On the development of hydrogen sensor for nuclear power plants CZ
457 *Falchetta, Mottola, Iervolino, Vaiano, De Marco Photocatalytic hydrogen production from gallic acid using catalysts prepared via supercritical CO2 IT
458 *Karimi, Gazzani Screening materials for removal of CH4 from air and non-fossil diluted sources by cyclic adsorption process NL
459 *Pratama, Huang, Lee A mathematically simplified solid–solid–liquid ternary phase diagram with tie-lines for early process development validated by chiral resolution of racemic ibuprofen TW
460 *Ciocirlan, Osman Effect of dibutyl ether blending with biodiesel or diesel fuel on their physical properties RO
461 Jiang, *Leong Enhanced bio-hydrogen production from spent mushroom substrate through pretreatment and clostridium bacterial optimization: A sustainable approach TW
462 *Miyashita, Imai, Kamata, Nakayama Enhancement of reaction rate on enzymatic hydrolysis of sugarcane bagasse JP
463 *Machado, Silva, Faria, Sampaio Enhancing hydrogen production with immobilized carbon nitride photocatalysts on 3D-printed structures PT
464 *Esposito, Cafiero, Muccioli, Meloni, Palma High-performance Pt-Sn-based catalyst for direct propane dehydrogenation in fluidized bed IT
465 *Kim Characterization of carbonation-cured ordinary Portland cement at a very early age of curing via Raman spectroscopy KR
466 *Park, Kim Surface modification of waste construction materials for reusability through carbonation process KR
467 *Choi, Omanovic Synthesis of nanostructured (Ni0.7-W0.3)1-xRux electrocatalysts for hydrogen evolution reaction in PEM water electrolysis CA
468 Gotal Skoko, Flanjak, Tomac, Ačkar, Šubarić, Babić, Jokić, Aladić, Jozinović, *Lončarić Traditional apple cultivars: diversity in the polyphenolic profile as a defence against P. expansum infection of apples HR
469 *Walter, Hoffmann, Hamel Transient and spatial simulation of coking and regeneration on single catalyst particle scale DE
470 Paudel, Mainali, Paneru, Karki, *Pochareddy, Shakya, Karki Hydrogen production from surplus hydropower: Techno-economic assessment with alkaline electrolysis in Nepal’s perspective NL
471 *Mousavi, Zamani Mycelium-based filter paper derived from carrot waste for dye removal SE
472 *Schneiderová, Kroupa, Zubov, Kosek Electrospray deposition studied using DEM CZ
473 *Seo Multiscale optimization of carbon capture processes using ionic liquids KR
474 Ho, Chin, Asano, *Wang Nitrogen transformation dynamics of chicken-feather hydrolysate in soils TW
477 *Ali First-principles study on graphene-passivated MXene for electrochemical energy production and storage SA
478 Vardar, Demirel, *Onay Review of common bioplastics’ degradation potentials in biogas plants TR
479 *Jalloul, Hammoud, Hachem, Albadarin, Ahmad‎ Fe-doped UIO66 MOF for the tetracycline photocatalytic degradation under visible light: effect of modulators LB
480 Abarca, Coz-Cruz, *Díaz-Sainz, Irabien Analysis of the influence of operating variables in a three-compartment electrochemical reactor for the electroreduction of CO2 to formic acid ES
481 *Zentou, Attia, Abelnaby Techno-economic performance analysis of a PVT/hydrogen storage system for direct carbon capture system SA
482 *Cobo, Guillén-Gosálbez Comparative sustainability assessment of negative emissions technologies and practices ES
483 *Merino-Garcia, Albo Decarbonization of energy-intensive industries: challenges and opportunities with photoelectrochemical strategies ES
484 Abdellatif, Surkatti, Muhammad, Sodiq, Al-Ansari, *Amhamed Investigating direct air capture (DAC) performance and thermodynamic efficiency: Does humidity play a critical role? QA
485 *Merino-Garcia, Crespo, Albo Layered Ni-decorated BiVO4 photoanodes for an improved photoelectrochemical activity to produce renewable energy carriers with solar light ES
486 Vastyl, Lestinsky, Marsolek, Koumar, Maxa, Korpas, *Obalová Selection of mixed solvent for crude caprolactam extraction CZ
487 *Lan Enhancing circular economy through biorefinery of brewing waste: A strategy for producing value-added biomolecules TW
488 *Kim, Kim Enhancement of high heat resistance properties via optimization of epoxy resin synthesis based on hydroxyl-terminated polybutadiene KR
489 *Kwon, Park, Kim Influence of grafting on the morphology and properties of waterborne polyurethane-acrylate coatings KR
490 *Park, Kwon, Kim Comparative study on performance of epoxy/silica composites reinforced with novel biomass-based and commercial silane coupling agents KR
491 *Moon, Kim, Kim Synthesis and evaluation of imidazole modified silane with strong adhesion and storage stability KR
492 *Ko, Chien, Yang, Chang, Lin Application of biomaterials in starch-based greaseproof paper coating TW
493 *Cheng, Hsu, Liu, Lin, Chou Reclamation agro-industrial waste biomass for sustainable development via insect biorefinery TW
494 *Fujii, Yoneyama, Matsuda Development of osmotically assisted reverse osmosis (OARO) separation process for ammonium chloride solution JP
495 *Fujii, Matsuda Optimal design of a hybrid adsorption-membrane system for CO2 separation by statistical modelling JP
496 *Shimizu, Hagiri, Kashima Superior adsorption ability of a new activated carbon prepared from tochinoki fallen branches and immobilizing in biopolymer membrane JP
497 *Li, Liu, Bai, Zhao, Xi Design and preparation of functional cyclomatrix polyphosphazene CN
498 *Aliyev, Amze, Kudryashov, Nuraje Maximizing hydrogen production: Leveraging bioinspired photonic structures in anodic alumina for enhanced light absorption KZ
499 *Chan, Yu Influence of surface charges on ion transport in a pH-regulated nanofluidic transistor TW
500 *Hernández Martínez, Melchor-Martínez, González-González, Parra-Saldívar Synthesis of Fe3O4 magnetic nanoparticles on modified multi-walled carbon nanotubes for laccase immobilization and its potential application in the degradation of emerging pollutants in wastewater MX
501 *Favelukis On the deformation of a drop in a nonlinear shear flow IL
502 Hussain, *Song, Joh, Hong, Lim, Park Enhancing performance and durability of large-area anode-supported solid oxide fuel cells and stacks KR
503 *An, Chung Direct synthesis of hydrogen peroxide over Pd/C catalyst supported on heteroatom-doped carbon KR
504 *Hourdel, Lebaz, Ripoll, Peral, Bensaid, Luthra, Briançon, Cogné mRNA-loaded lipid nanoparticles (LNP-mRNA) preparation process and CFD-based scale-up FR
505 *Fernández-Marín, Oliden-Sánchez, Armendariz-Ruiz, Filippini, Prato, López-Gallego Carbon Dots as pH sensors for monitoring enzymatic reactions ES
506 *Baier, Nathrath, Li, Hübner, Wasserscheid, Schuehle Dynamic hydrogen release from perhydro benzyltoluene using spray coated and laser structured plate catalysts DE
507 *Fernández, Barragán, Díaz, Garcia, Abanades Pure CO2 obtention through an advanced CO2 capture process for carbon-intensive industries via CaCO3 calcination with steam ES
508 *ALola Urban-rural clean energy gap NO
509 *Cho, Lee Experimental study of hydrogen production from thermal cracking of HDPE and role of activated carbon KR
510 *Kadar, Gackstatter, Ortner, Köberlein, Geißelbrecht, Wasserscheid Power-dense H2-release from LOHCs: Scaling from lab- to MW-scale with an inverted fixed-bed reactor design DE
Column 1 Column 2
Row 1 Data 1 Row 1 Data 2
Row 2 Data 1 Row 2 Data 2